Meet the new, gyro-stabilized
camera head with zoom-focus support
dedicated for cameras up to 20kg/44lb



Performance & precision
Stabilization strength +20% / -20% in each of 5 profiles
Wide rotation
Tilt: +90 / -140; Roll: +60 / -60; Pan: continuous 360
Multiple control & performance modes
Fixed stabilization, Follow mode, Wireless radio control
Highest quality of reinforced materials
Reinforced aluminum 6061 T6 and carbon fiber composite construction
Multiple applications
Telescopic cranes, fixed cranes, speed dollies, tripods, camera cars and more
Build on experience
Elit is an effect of years of experience
Suitable for big cameras
Dedicated for cameras up to 20kg/44lb
The best stabilisation
Advanced IMU, 3 absolute encoders on each axis, 32bit main processor


Elit remote controller
Direction of zoom & focus
Slow automatic zoom-in or out (sub-zoom)
Speed of zoom & focus
Range of focus (top and bottom)
3-axis joystick to control tilt, roll & pan
Joystick speed adjustment
Joystick “smooth start-stop” adjustment
Motors start/stop
Reboot sequence restart
Tilt- & pan-axis joystick reverse
Camera profiles switch (5 different profiles)
Motors strength (+20%/-20% in each of 5 profiles)
Stabilization strength (+20%/-20% in each of 5 profiles)
Tilt and roll axis home position switch
Specification
Weight excluding battery: 12.2kg
__________________
Max. camera weight: 20kg/44lb
__________________
Camera cage internal dimensions: H315mm x W309mm x D381mm
__________________
Hollow shafts in all axis: tilt, roll, pan
__________________
Voltage: 22-25.3V 10.000-30.000mah battery (6S lipo recommended) or 24V DC power supply
__________________
Quick and easy tool-less balancing
__________________
Built-in AHRS with GPS prevents horizon drift for automotive shots
__________________
IMU (gyroscope and accelerometer), 3 absolute encoders on each axis and 32bit main processor are responsible for fast reaction to any external factors disturbance (like car shakes, crane shakes, etc.)
__________________
Reinforced aluminum 6061 T6 and carbon fiber composite construction allows to get best quality stabilization even in the hardest terrain and weather conditions
Axis working range::
a) Tilt: + 90 / – 140
b) Roll: +60 / -60
c) Pan: continuous 360
__________________
4 direct drive brushless motors with encoders are responsible for high torque and speed of movement
__________________
3 types of control / performance:
a) Fixed stabilization (always pointing one direction)
b) Follow mode (aavailable on tilt/roll/pan axis) (available on request)
c) Wireless radio control (available in all types of control)
__________________
Built-in 3 voltage regulators to power external devices (camera, follow focus, wireless vision, etc.):
a) 12V/10A x1 (D-tap connector)
b) 12V/5A x2 (D-tap connector)
c) 5V/4A x1 (D-tap connector)
__________________
2-second boot time
__________________
Wireless radio range: 200-500m (open space)
__________________
See detailed dimensions here
Safety motors switch (after power on Elit will not start motors)
__________________
Lock mechanism on tilt and roll axis for easier balancing and set-up
__________________
Internal wires routing helps in operation and initial camera setup
__________________
Camera bridge and dove plate included
__________________
Quick release connector allows to mount Elit almost on any rig within 10 seconds
__________________
Top and bottom mount possible (undeslung and overslung)
__________________
Transporting cage included
__________________
Pan axis Mitchell mount allows to mount Elit almost on any rig (telescopic-cranes, speed dollies, shock absorbers)
__________________
Elit WRS wireless controller included
__________________
+ Wireless controller functions (click here)
Wireless controller functions:
a) 3 axis joystick to control tilt, roll an pan axis
b) Joystick speed adjustment
c) Joystick “smooth start – stop” adjustment
d) Motors start/stop
e) Boot sequence restart
f) Tilt/pan axis joystick revers
g) Camera profiles switch (5 different profiles of different weights of camera)
h) Motors strength
i) Stabilization gain
j) Tilt and roll axis home position switch


Get a quotation
Leave us your email / phone, we will contact you back:
UAV Robotics Sp z o.o. realizuje projekt dofinansowany z Funduszy Europejskich “ Wdrożenie rynkowe innowacji mechatronicznych firmy UAV ROBOTICS”
Celem projektu jest wdrożenie na rynek innowacyjnego produktu Spółki UAV Robotics Sp z o.o.
Dofinansowanie projektu z UE: 776 220,00 zł
Wartość projektu ogółem: 1 092 029,20 zł
